HomeMy WebLinkAboutMappingMemo_FarmwayCrossing
Memorandum
To: Katie Wright, Planner II
Caldwell P & Z Department Planning Staff From: Trevor Farris, GIS Technician
Dave Marston, Mapping Superintendent
Re: ANN24-000010, SPP24-000001- Farmway Crossing Subdivision No.2 Date: 12/04/2024 The Mapping Department provides the following comments on a request by Ardurra Inc., on behalf of Slate Ronald G and Jeanne M Family Trust, is requesting annexation of parcel R3259900000 with a zoning designation of R-1 (Low Density Residential) in compliance with the existing Comprehensive Plan Future Land Use Map designation of Low Density Residential. They are also requesting a preliminary plat for the site to develop Farmway Crossing Subdivision, a single-family residential development with 115 buildable lots over 44.49 acres, for a density of 2.58 dwelling units per acre. The subject parcel is located on the southwest corner of the intersection between Ustic Rd. and Farmway Rd., in Caldwell, Idaho. Subdivision / Development Name
1. Approved.
Address Number 1. Addressing shall be assigned after the Mapping Department receives both a CAD file and a copy of the recorded final plat for each phase. Street Names
1. Road names are approved. Lot and Block Numbers
1. Lots and block numbers shall start with Lot 1, Block 1 in Phase 1 and increase as introduced
by phase. Lot and Block numbers shall be unique and individual per preliminary plat.
2. Blocks 5 & 6 must begin in Phase 2.
3. Blocks 7, 8 & 9 shall not be in Phase 1, Block numbers needs must be adjusted to meet
standards above.
Phase Lines
1. Adjust phase lines so that lot frontage is entirely included within the phase for which it is to be developed.
Other comments:
1. Any changes to street names, lots, blocks, or phase lines shall be approved by the Mapping Department prior to construction drawing approval for the phase where changes are
intended.